The radial rotating nozzles enz golden jet® are equipped with 4 radial jets of 75°/90° for the pipe cleaning and 3 thrust jets for the advance which at the same time flush away the loosened residues. As a result, pipe ducts of all kinds, even with vertical borings etc., will be cleaned.

The moving part of the enz golden jet® nozzle rotates at a limited speed. These water jets hit the pipe wall directly with great impact, striking every corner, every dead end, every lateral pipe.

Applications

• Cleaning of drain pipes
• Cleaning of lateral pipes
• Removal of solid deposits

Working pressure up to 250 bar

Sizes available from ¼" to 1¼ "

The semi-radial rotating enz golden jet® nozzles with their 4 retroacting cutting-jets at an angle of approx. 45° cause simultaneously the cleaning procedure and the thrust for the forward move of the tool i.e. the jets combine rotation and thrust in one function resulting in a low water consumption. With sufficient water capacity, optional thrust jets can facilitate upward cleaning.

Applications

• Cleaning of pipes before TV-recordings
• To remove mineral deposits in pipes
• To remove roots up to Ø 5mm

Working pressure up to 250 bar

Sizes available from ¼" to 1 ¼"

enz golden jet® nozzles with forward impact angle of approx. 45° on the pipe wall as well as a front-guide jet (on request) and 3 retro-thrust jets cause a cork-screw-like advance through the clogged pipe. While the front nozzles loosens and the semi-radial nozzles disintegrate the residues, the thrust nozzles are driving the nozzle head forwards and simultaneously pushing the waste material backwards.

Applications

• Core-flushing of the steel pipes during hydraulic thrust-boring
• Cleaning of house connecting pipework from inside to the drain system
• Removal of ice in manholes

Working pressure up to 250 bar

Sizes available from ¼" to 1 ¼"

This allround enz golden jet® Combinationnozzle is excellent for flushing out pipes as well as adjoining lateral pipes at any angle. It only requires a very small pump capacity and uses 2 radial jets at a 90° angle to the pipe wall and 2 semiradial retro-jets at a 45° angle.

This combination allows both, a forward thrust of the nozzle and simultaneously, a flushing away of the waste material.

Applications

• To remove organic deposits
• To clean heat exchangers
• Cleaning of fat deposits

Working pressure up to 250 bar

Sizes available from M7 to 1 ¼"

The nozzle KBRV is provided with 2 semi-radial jets directed forward in an angle of 45°. As a result, this nozzle must either be equipped with extra thrust jets or be mounted on a lance. The forward jets desintegrate most any residue and flush the debris ahead of the nozzle.

Applications

• To remove plastic deposits
• To clean heat exchangers
• Cleaning of fat deposits
• Flushing of the pipes from the house
  toward the main line

Working pressure up to 250 bar

Sizes available from M7 to 1 ¼"

The BackJet® is a rotating nozzle with a revolutionary arrangement of the water jets. Instead of cleaning with the head, it uses its rotating body to achieve previously unmatched cleaning power.

The six-jet thrust part draws the tool over long distances and quickly transports the dissolved deposits back.

Characteristics

• Easy to handle
• The tool is practically maintenance-free

Applications

• For operation with recycling water and fresh water

Working pressure up to 200 bar

Sizes available from 1" to 1 ¼"

The enz golden jet® Bulldog Rotating Nozzle has been designed for operation with recycling water and fresh water. The cleverly built sliding bearing allows the use of every kind of recycled water. An integrated oil-free braking system results in a low wear and tear operation and in controlled numbers of rotation. In this way a most efficient and economic pipe cleaning is achieved. The bore of the nozzle insert determines the admissible size of the dirt particles up to a maximum Ø 1mm.

Transport and water costs are noticeably reduced.

Characteristics

• Easy to handle
• The tool is practically maintenance-free

Applications

• For operation with recycling water and fresh water

Working pressure up to 200 bar

Sizes available from ½" to 1 ¼"

The enz golden jet® rotating nozzle is provided with an eccentrically supported rotor, which produces very fast vibrations and pulsating jets. The resulting pulsations become as strong that deposits up to 10cm thickness are disintegrated.

Thanks to the application of the rotopuls nozzle, the more expensive work with the cutting tools or with the chain flail head can be avoided in many cases.

Important: Rotopuls nozzles develop strong hydraulic impacts and vibrations. This can possibly cause damages in some sort of pipes (e.g. earthenware pipes, thin-walled plastic pipes or badly-bedded PVC pipes).e

Applications

• The Rotopuls nozzles are conceived to remove middle-hard deposits in pipes of plas-tic, steel or concrete

Working pressure up to 250 bar

Sizes available from 1" to 1 ¼"

With this enz golden jet® tool large channels will be efficiently cleaned. They can be used for dimensions of Ø 300 - 2000 mm. The skids are easy to adjust and can even be adapted to clean egg-shaped or ovlal pipe profiles. The propeller nozzles have been designed for the use of recyclingwater, of course they can be used for fresh water as well.

Applications

• For cleaning large channels

Working pressure up to 200 bar

Sizes available from 1" to 1 ¼"

The enz golden jet® gliding nozzles are designed for pipes of Ø 40 - 400 mm. The gliding nozzles have the unique function to work close along the pipe walls. As a result the nozzle cleans very efficient.

These tools work with small water volumes. About 10 to max. 60 l/min are enough for cleaning pipes up to Ø 400 mm.

Applications

• for special applications with small water volumes

Working pressure up to 1000 bar

Sizes available from 1/8" to 3/8"

The enz golden jet® Bulldog® 1000 bar rotating nozzle is specially designed for internal pipe cleaning up to 1000 bar. It is suitable for removing even the most stubborn deposits from the pipe walls. Thanks to its clever bearing system, the Bulldog is virtually leak-free, resulting in higher efficiency. In addition, the forward-facing cross-jet cuts out the material from the blocked pipe like a milling cutter.

Applications

• Cleaning of heat exchangers in chemical and nuclear plants
• general industrial cleaning

Working pressure up to 1000 bar

Size available M24x1.5"

The maximum pressure rotating nozzles enz golden jet® are most efficient in cleaning the inside wall of pipes with a pressure up to 1000 bar. They are most appropriate to remove harder deposits from the pipe walls.

Applications

• Cleaning of heat exchangers in chemical and atomic plants and for general industrial pipe cleaning

Working pressure up to 1000 bar

Please see data sheet for measure tables.

The cross jet enz golden jet® nozzle (with brake jet) is applied for industrial cleaning of heat exchangers and completely clogged pipes.

The cross jet, which is directed to the front, cuts the material in the completely clogged pipe like a milling cutter. Simultaneously 2 radial jets of 90° clean the pipe wall. Through the same effect the removed material is flushed away. The cross jet causes a reaction force which, in many cases, makes it necessary to set the nozzle on a lance. If the quantity of water from the pump is sufficient, a thrust piece can be set in between nozzle and hose.

Through all that, the cross jet nozzle has become a tool for universal use.

Applications

• For industrial cleaning of heat exchangers and completely clogged pipes

Working pressure up to 1000 bar

Sizes available from 1/8" to ¼"

Surface Cleaner

The rotating enz golden jet® nozzle for cleaning surfaces is remarkable for its high efficiency. It outperformes conventional flat jet or round jet nozzles with a large margin.

Turbo Killer

This special nozzle for cleaning surfaces is rotated by the cleaning liquid by means of an impeller. The exhaust axis has an inclination against the central axis of the rotating nozzle, which results in a circular movement.

Applications

• Surface Cleaner: To remove deposits of concrete-slurry, cleaning of store fronts, steps, walls, traffic signboards etc.
• Turbo Killer: for the cleaning of steps, walls, artificial surfaces, traffic signs, etc.

Working pressure up to 250/1000 bar