Made of wear-resistant, hardened steel, provided with front jet insert and blind plug (interchangeable). Angle of jet is 30°, sturdy wall thickness, long service life and a minimum of wear and tear.

All nozzles from art. 30.038 onward are provided with ceramic inserts. Because of this, the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer.

Applications

• Appropriate for removal of sludge deposits and cloggings

Working pressure up to 250 bar

Sizes available from 1/8" to 1 ¼"

This enz golden jet® jet nozzle is made of wear-resistant hardened steel. The "grenade" and the "bomb" are joined in the same nozzles.

Two different jet angles of 10° and 30° perform together strong traction and effective cleaning. The high efficiency is reached by appropriate water guidance.

Latest: For optimal around cleaning, the nozzles 40.075 to 42.125A can be equipped with fan-jet ceramic inserts.

Applications

• For removal of loose rubble stone, gravel and soft deposits
• For a previous cleaning before the use of chain flail head or cutter

Working pressure up to 250 bar

Sizes available from 3/8" to 1 ¼"

Concentrated powerful advance by means of 4 front jet nozzles. The sharp edges cut, break and penetrate through every kind of blockage. Made of wear-resistant, hardened steel. All nozzles from art. 60.050 onward are provided with ceramic inserts. Because of this, the efficiency is considerably higher compared with those nozzles with drilled holes and the service life is several times longer.

Applications

• Penetrating of completely clogged pipes
• Opening of interlaced roots
• Opening of frozen pipelines
• Flushing out at hydraulic thrust boring

Working pressure up to 250 bar

Sizes available from 1/8" to 1 ¼"

This tool is especially suited to clean flat pipes and channels. The flat design combined with the rounded corners and edges provides the tool with ideal gliding properties.

Ceramic inserts with flow straighteners and an optimized flow reversal create compact and aggressive water jets.

The low and compact design facilitates access to a wide variety of pipes and channels.

Applications

• Appropriate for removing mud and loose rubble in flat pipes and channels, e.g. run-off gutters

Working pressure up to 250 bar

Sizes available from ½" to 1 ¼"

Here was carried out a successful improvement in channel and pipe cleaning. The Enz-Bulldozer has a hydrostatic chamber, herewith reducing water turbulences and improving the flow dynamic to the ceramic inserts. The result is a compact, aggressive and most effective water jet not attained up to now. A forward jet, on all Enz-Bulldozer, clears the debris ahead of the advancing unit. If desired, the front-jet can be closed by a blind plug. Two additional nozzles, set slightly higher, clean the sides of the channel.

Characteristics

• enormous flushing capacity = reduced water consumption
• big water acceleration = superb flushing effect
• no swimming-up of the tool = very good cleaning of ground in channels with large water passage
• excellent gliding property: forwards and backwards thanks to the rounded skids and the front-jet

Applications

• The low and compact construction allows various uses in heavily polluted pipes

Working pressure up to 250 bar

Sizes available from ¾" to 1 ½"

These tools are outstanding in their enormous flushing capacity. Their main application is cleaning large fully surcharged pipes and drains bigger than Ø 500 mm. The specific arrangement of the nozzle inserts ensures that cleaning is done carefully because the nozzle jets do not work directly against the pipe wall. As a result, this tool is also appropriate for cleaning older channel systems.

It integrates the heavy water flow in pipes and channels into the flushing and cleaning process. In this way the water volume usable for cleaning is enhanced to five times the actual pump capacity. A pump of 300 l/min increase the flushing capacity of the nozzle to 1500 l/min. As a result enormous quantities of sand and gravel can be removed fast and efficiently.

Applications

• for enormous flushing capacity

Working pressure up to 200 bar

Sizes available from 1" to 1 ¼"